TG Brushless Motor Series

ThinGap’s TG Line of Motors

Highest power density motor design with high torque and inherent high speed capability.

  • “Classic ThinGap” topology
  • Optimized for highest power density with high torque capability
  • Dual inside and outside rotating back iron
  • Zero cogging, patented iron-less composite stator
  • Available in frameless kit form or motor assembly with shaft and bearings
  • Typically Hall effect sensors are pre-aligned and factory-installed, encoders option
    is available on some models
  • Sizes from 50 mm to 1 meter, power levels range from Milli to Mega Watts
  • 3 phase brushless, precision sinusoidal waveform
  • Fail-safe wrap available over rotor magnets for ultra reliability
  • Fully encapsulated stator windings

 

Available Products

Average Lead Time: 8-10 weeks

TG Sub-SeriesMotor ModelContinuous Torque
(N-m)
Max Speed
(RPM)
Frameless STEP / DrawingFramed STEP / DrawingAlternate Framed STEP / Drawing

2 Series


2" OD


TGI 231X0.746,500STEP file STEP file Framed DrawingSTEP file Framed Drawing
TGO 232X0.3516,000STEP file Frameless DrawingSTEP file Framed DrawingSTEP file Framed Drawing
TGO 233X0.6916,000STEP file STEP file Framed DrawingSTEP file Framed Drawing
TGD 234X1.026,500STEP file Frameless DrawingSTEP file Framed DrawingSTEP file Framed Drawing
TGI 0460.713,300STEP file N/AN/A

3 Series


3" OD

TG 303X0.1430,600STEP file Frameless DrawingSTEP file Framed DrawingN/A
TG 304X0.1928,400STEP file Frameless DrawingSTEP file Framed DrawingN/A
TG 305X0.2117,900STEP file Frameless DrawingSTEP file Framed DrawingN/A

4 Series


4" OD

TGO 1100.994,000STEP file Frameless DrawingN/AN/A

5 Series


5" OD

TG 513X1.6818,400STEP file Frameless DrawingSTEP file Framed DrawingN/A
TG 514X2.6513,900STEP file Frameless DrawingSTEP file Framed DrawingN/A
TG 515X3.5710,300STEP file Frameless DrawingSTEP file Framed DrawingN/A

7 Series


7" OD

TG 713X2.9813,700STEP file Frameless DrawingSTEP file Framed DrawingN/A
TG 714X4.2610,800STEP file Frameless DrawingSTEP file Framed DrawingN/A
TG 715X4.8310,300STEP file Frameless DrawingSTEP file Framed DrawingN/A
TGO 1909.466,000STEP file Frameless DrawingN/AN/A